|
外观尺寸
|
W 220 mm x D 82.6 mm x H 120 mm
|
|
适合光源(输出定额)
|
Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light)
Total for 8 channels: 95 W (EL connector: one 95 W connector)
|
|
通道数
|
8 channels
|
|
发光方式
|
Constant/Strobe lighting
|
|
驱动方式
|
24V LIGHT connectors: Constant-voltage system,
HLV LIGHT connectors: Constant-current system
|
|
调光方式
|
24V LIGHT connectors: PWM control and lighting time control,
HLV LIGHT connectors: Variable-current control
|
|
PWN频率
|
125 kHz
|
|
输入电压
|
100 to 240 VAC (+10% -15%)
|
|
频率
|
50/60 Hz
|
|
消耗功率
|
130 VA
|
|
输出电压
|
24 VDC
|
|
输出电流
|
Total for 8 channels: 3.95 A
|
|
涌入电流(typ)
|
15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
|
|
调光
|
Manual: 256-step using the front setting switch
External: Command input via TCP/IP or UDP/IP communication
|
|
错误检测显示
|
Digital display on the front-panel;
OCP: Overcurrent error, EFN: Fan Stop Error,
and EID: ID error (HLV3/HLV2-series Spot Lights only)
|
|
错误检测输出
|
Command sent when overcurrent output is detected.
|
|
过电流保护
|
Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
*Do not intentionally short-circuit the positive and negative output terminals.
|
|
输出端口
|
SMP-03V-BC x 16, ELR-02V x 1
|
|
外部控制端口
|
Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: RJ-45 connector
|
|
适合规格
|
CE, UKCA, RoHS
|
|
使用温湿度
|
Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
|
|
保存温湿度
|
Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
|
|
冷却方式
|
强制冷却
|
|
重量
|
1,500 g
|
|
材质
|
Aluminium, ABS
|
|
附属品
|
2m long 3-pin power cord with ground terminal x1
Base Brackets x1 set
Instruction Guide x1
|
|
Program
|
【Sample Program】
Sample programs are available. See the 选件 tab.
|